The best option we have available for your International 4700 is the Buyers Products Class 4 Hitch Receiver # 3371801055. This can be either bolted or welded to the bottom of the frame rails on your truck and it features a long receiver design to help clear the flat bed for easier access. It has a towing capacity of 10,000 pounds and a tongue weight limit of 1,000 pounds.
I have attached a short video review that you can check out as well. view full answer...
We are going to need to know the wheel bolt pattern on your trailer before we can pick out replacement wheels. The wheel you referenced # LHACK133 has an 8 on 6-1/2 inch bolt pattern. I attached a help article that covers determining bolt patterns as well.
What capacity axles do you have on your trailer? Most likely they are 3,500 since that is the very common capacity for 10 inch assemblies. For that you would need the part # AKEBRK-35R-SA for the right hand side and # AKEBRK-35L-SA for... view full answer...
The label side of the Tuson Electronic Sway Control System for Electric Trailer Brakes # 335TSC-1000 needs to face forward and be in a vertical orientation perfectly centered on the trailer 5-10 feet back from the center of the king pin like what you see in the picture I attached.
That said, for the type of sway you are experiencing your best solution it so move your axles further back on your trailer. view full answer...
The best option we have for your 2001 International 4700 is going to be a weld-on hitch plate. Unfortunately there are no bolt on options available for your truck. Make sure to use an experienced welder for installation of the hitch plate. We have the following hitch plates available:
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043
Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040
Buyers Products Fabricators Hitch Plate -... view full answer...
According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International 4700 LPX you will need to use a universal weld-on hitch plate. Unfortunately, there are no custom hitch plates available that will fit your truck. We have the following options.
Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042
Buyers Products... view full answer...
Go To Results